MindScale iPhone App Manual En

MindScale iPhone App Manual

Caution

• This application "MindScale" is not for medical use.
• Please talk to your doctor if you need medical judgment.

App installation

• Download and install MindScale from the App Store.

Email address settings

• Set the email address etc. according to the message at the bottom of the application.
• Tap the menu icon in the upper left.

• Set your email address and device ID.

Device ID setting

• Next, set the device ID.
• The device ID will be displayed as shown in the picture when you press the button labeled M5 on the entire surface of the sensor.
• In this case, the device ID will be bd14.

• When using Android Watch as the sensor, the 4-digit alphanumeric characters displayed on the screen will be the device ID.

• Set the device ID displayed on the sensor to the app.
• If you change the device ID, you need to restart the application.
• From the second time onward, the email address and device ID are memorized, so there is no need to reset them.
• When the settings are complete, tap the OK button to return to the main screen.

Pulse wave measurement

• When you put your finger on the sensor part, the pulse wave data is read and displayed as a graph.
• Please measure quietly so as not to move your finger during the measurement.

Precautions for use

• If you change the device ID, be sure to restart the application.
• If you cannot connect, try pushing the button marked M5 on the front of the M5StickC. Reset the device side.
• If you cannot communicate with the sensor, make sure that Bluetooth is turned on in the iPhone settings.