Difference between revisions of "MindScale iPhone App Manual En"

From Yume Cloud
Jump to: navigation, search
(メッセージ)
(MindScale iPhone App Manual)
Line 1: Line 1:
 
= MindScale iPhone App Manual =
 
= MindScale iPhone App Manual =
 +
 +
== Caution ==
 +
* This application "MindScale" is not for medical use.
 +
* Talk to your doctor if you need medical judgment.
  
 
== App installation ==
 
== App installation ==

Revision as of 08:54, 15 December 2021

MindScale iPhone App Manual

Caution

  • This application "MindScale" is not for medical use.
  • Talk to your doctor if you need medical judgment.

App installation

IMG 1155.png

  • Download and install MindScale from the App Store.

Location permissions

IMG 1188.png

  • At the first startup, a message to allow access to location information and Bluetooth will be displayed, so allow it.
  • This permission is required to communicate with the sensor using Bluetooth.

Email address settings

IMG 1191.png

  • Set the email address etc. according to the message at the bottom of the application.
  • Tap the menu icon in the upper left.

IMG 1174.png

  • Set your email address and device ID.

Device ID setting

Mindscaledeviceid.jpeg

  • Next, set the device ID.
  • The device ID will be displayed as shown in the picture when you press the button labeled M5 on the entire surface of the sensor.
  • In this case, the device ID will be bd14.

Screen mindscalew001.png

  • When using Android Watch as the sensor, the 4-digit alphanumeric characters displayed on the screen will be the device ID.

IMG 1174.png

  • Set the device ID displayed on the sensor to the app.
  • If you change the device ID, you need to restart the application.
  • From the second time onward, the email address and device ID are memorized, so there is no need to reset them.
  • When the settings are complete, tap the OK button to return to the main screen.

Application restart

IMG 1192.png

  • You have changed the device ID, so restart the application.

Answers to two questions

IMG 1169.png IMG 1170.png

  • Please answer two questions after starting the application.

Pulse wave measurement

Mindscale009.jpeg

  • When you put your finger on the sensor part, the pulse wave data is read and displayed as a graph.
  • Please measure quietly so as not to move your finger during the measurement.

IMG 1193.png IMG 1194.png

  • Measurement takes about 3 minutes.
  • When the measurement is completed, a message to send the measurement data to the server is displayed.
  • Tap the "Yes" button to finish the measurement.

Message

  • Describes the displayed message

Network connection error

  • If the network connection fails, the following message will be displayed. Check your network connection.

IMG 1373.png IMG 1374.png

If the registered email address is incorrect

  • If the registered email address is incorrect, the following message will be displayed. Please set the correct email address.

IMG 1379.png IMG 1380.png

If the correct email address is set

  • If your email address is set correctly, you will see a message similar to the one below.

IMG 1377.png IMG 1378.png

If an error occurs when sending data

  • If an error occurs when sending data, the following message will be displayed. Make sure your network connection or email address settings are correct.

IMG 1371.png

When data can be sent correctly

  • If the data can be sent normally, the following message will be displayed asking whether to send the data.

IMG 1383.png

Precautions for use

  • If you change the device ID, be sure to restart the application.
  • If you cannot connect, try pushing the button marked M5 on the front of the M5StickC. Reset the device side.
  • If you cannot communicate with the sensor, make sure that Bluetooth is turned on in the iPhone settings.

Bluetoothsettingiphone.png